Rale Transformer Design System

Powerful Software

The Rale software is intended to be used by design engineers for transformer manufacturers. Rale software is the most comprehensive and powerful software available.

There are four complete programs included in the package, including:

The Small Transformers Program is the most frequently used program. It is used to design transformers with bobbins and tubes in a power range up to 10kVA per phase and a frequency range up to 500kHz.

TKX:
Power Range: 0 - 10 KVA per phase
For designing on bobbins or tubes without cooling channels
Dry or potted
Presently up to 500 KHz (1000 KHz capacity in process)

The Toroidal Transformers Program is used to design transformers with toroidal cores in a power range up to 10kVA and a frequency range up to 500kHz.

TRX:
Toroids
Power Range: 0 - 10 KVA per phase
Dry or potted
Presently up to 500 KHz (1000 KHz capacity in process)

The Large Transformers Program is used to design air & oil cooled transformers with cooling-channels technology in a power range from 0.1kVA up to 10MVA per phase and a frequency range up to 1000Hz.

TGX:
Distribution and Large Transformers
Power Range: 100 VA - 100 MVA
With cooling channels
Dry or Oil Cooled
Up to 1000 Hz

The Chokes&Inductors Program is a very powerful and universal program. It is used to design chokes & inductors with cooling-channel technology or bobbins & tubes in a frequency range up to 500kHz.

DKX:
All type of Chokes/Inductors
Power Range: 0 - 10 KVA at 50/60 Hz.
Up to 500 KHz

Why use the Rale Design System?

There is only one reason to use any software package, including the Rale distribution and power transformer and inductor design software, and that is to have another tool in your company to help you increase profits. So the question really is, "How will the Rale power transformer and inductor design software help you make money?".

  1. Material Savings:
    Because of the software design and the ease of making multiple iterations of the same design, it is easy to optimize the transformer design to use a minimum of expensive materials. You can customize the design to meet you own inventory needs using wire sizes and steel grades that cost less for you to purchase and are best for easy production.
  2. Time Savings:
    Engineering time required to complete a design is reduced to mere minutes. This is especially valuable when you need to get quick and accurate quotations to your potential customers.
  3. Error Free:
    Because all calculations are done within the program, human errors are eliminated which in turn eliminate costs associated with these. This aspect is also very important to the productive capacity of your design engineers as design stress is alleviated.
  4. Prototypes Eliminated:
    The Rale software gives you the opportunity to simulate the designed transformer under varying conditions and observe how the transformer will react under those conditions. You will obtain information exactly as if you had built a prototype and made actual measurements in your own laboratory. Therefore, until you have a design iteration that meets all of your requirements you do not need to build any test transformers. Eliminating expensive prototypes will have a real positive effect on your final profits.
  5. Documentation:
    The Rale software immediately generates three important pages when your design is completed. The first page gives you detailed input data with a schematic. The second page provides details on the Mechanical Part including the bobbin, core and windings. The third page provides details on the electrical, magnetic, and thermal data (nominal, no-load, short circuit, and duty cycle operations). Some of this documentation can be used immediately to accompany customer quotations thereby eliminating the need to create time consuming and difficult documentation just for a quote. The Rale software also gives you the option to create your own pages in your own format for production requirements

Seeing is Believing!

No matter what anyone claims about any program or service, we all need to see it to believe it. If you would like more information about the programs, take a look at our software demonstration.  This demo will walk you through a basic design so you can see the basics of how the program works.

Pneumatic Cutting Tool
Pneumatic cutting tool
Ideal for cutting your heavy, rectangular copper or aluminum winding materials.

 


Rale Design Service


New Service:
magnetic components designed without the need to lease the software.